Cold and wet couple of months at Rowsley. The regulars keep pushing on with the restoration of 7828’s interior. The vestibule and luggage area ceilings have been treated to further paint, and further panel scraping has almost completed the removal of the old varnish. The old saloon lower panels had become a source of concern- the seat rails and table brackets are screwed to them, and water damage from the windows and regular repositioning of fittings had caused many of them to split in crucial places. Some of the plywood panels had warped within the mahogany frames, others had disappeared, whilst a number of tenons had broken off in their mortises leaving corners flapping. The surviving panels have been stripped of beading and any usable sections of frame, and a complete set machined up and assembled- a whole two weeks work! These now await staining and varnishing to match the original sections of interior to be found on the partitions and upper areas of sidewall. Once these are fitted, the seat supports can go in.
Some interior transfers have been sourced, and the new artwork for the exterior insignia and numbers has been started in earnest (a contract job). The new castings for the passenger communication gear are just a few coats of paint away from being fitted, which would be nice to do as we could then put away the white paint.
We don’t have any appropriate tables for it yet, but we do now have all the brass wall mounted fixing brackets, adjustable table leg bases and clips for when we do. The timber draught excluders for the tops of the droplights are now repaired and covered in new felt, ready to be fitted with a set of new springs.
There has been a trip to York to delve into the archives, and several other ‘runs’ are planned to such far flung places as Birmingham, Devon, Peterborough, Telford, Sheffield and Matlock to collect other materials and components. The new moquette is now in the shed, and very excited I am about it too.